Scotts Weed And Seed

ILGM

Buy Cannabis Seeds Online

Scotts 4 Step Lawn Care – Step 2: Turf Builder Weed & Feed Turf Builder Weed & Feed kills weeds that already exist in your lawn and feeds the lawn for up to 2 months. A new and improved formula Scotts has two different weed and feed products: Scotts Lawn Pro Super Turf Builder with Plus 2 Weed Control, and Scotts Super Bonus S Weed and Feed. (As with other chemical lawn applications you must be sure to follow the manufacturer’s directions). Weed and feed does just that–it feeds the lawn to promote root … Learn how long it takes Scotts Weed and Feed to work to make sure you apply the right amount at the right times.

Scotts 4 Step Lawn Care – Step 2: Turf Builder Weed & Feed

Turf Builder Weed & Feed kills weeds that already exist in your lawn and feeds the lawn for up to 2 months. A new and improved formula means that you’ll get up to 2X more powerful dandelion and clover control!

How to use?

1) Check the Weather: If rain is in the forecast in the next 24 hours, apply another day. Rain can wash the particles off of weed leaves before it has a chance to work properly.

2) Fill and Set Spreader: Applying Scotts® Turf Builder® Weed & Feed requires a lawn spreader. If you need a new spreader, visit your local Valu today! Click here or reference the back of the product for spreader settings and full instructions.

3) Apply to Wet Lawn: Make sure the grass is wet from dew or sprinkling before applying. This helps particles adhere to weed leaves to produce best results. For even application walk at a steady pace slightly overlapping each pass. After applying this product you don’t water your lawn for at least 24 hours. Just like rain, watering your lawn after applying Weed & Feed washes the weed control particles off of weed leaves before they can fully work.

4) Clean-Up: Sweep product from hard surfaces onto the lawn to keep valuable feeding nutrients on the grass and out of storm drains.

When to apply?

Apply when weeds are most active, usually April-September. It’ll be effective as long as weeds are actively growing and daytime temperatures are between 60°F and 90°F.

If you have recently applied another fertilizer (e.g. Scotts® Turf Builder® Lawn Food or Scotts® Turf Builder® Halts® Crabgrass Preventer with Lawn Food) wait at least 30 days to apply Scotts® Turf Builder® Weed & Feed.

How often?

Apply up to twice a year, but wait at least 30 days between applications.

What exactly does it control?

Short answer: pretty much everything. Weed & Feed kills dandelions, clover, and other major lawn weeds.

Long answer: Aster, Bindweed, Bittercress, Black Medic, Buckhorn, Bull Thistle, Burclover, Buttonweed, Canada Thistle, Carpetweed, Catsear (Coast Dandelion), Chickweed, Chicory, Cinquefoil, Clover (Hop), Clover (Red), Clover (White), Cudweed, Curly Dock, Dandelion, Dichondra, Dollarweed, English Daisy, Evening primrose, Filaree, Fleabane, Ground Ivy, Hawkweed, Healall, Henbit, Horseweed, Knotweed, Lambsquarters, Lespedeza (Seedling), Lippia (Matchweed), Mallow, Moneywort, Morning Glory, Pepperweed, Pigweed, Plantain, Pursiane, Pusley, Ragweed, Red Sorrel (Sheep Sorrel), Scarlet Pimpernel, Shepherd’s-purse, Smartweed, Sowthistle, Spurweed, Vetch, Wild Carrot, Yarrow, Yellow rocket

See also  CBD Weed Seeds

Kids and Pets?

Keep people and pets off lawn during application. Do not allow people or pets to enter treated areas until dusts have settled. Particles should stick to weed leaves for at least 24 hours after application, so it is best to limit activity from kids and pets for 24 hours after application.

Have more questions? Come on in to Valu!

Stop by your local Valu Home Centers, and one of our knowledgeable associates will get you the right product and information for the job!

How to Apply Scotts Weed & Feed

Scotts has two different weed and feed products: Scotts Lawn Pro Super Turf Builder with Plus 2 Weed Control, and Scotts Super Bonus S Weed and Feed. (As with other chemical lawn applications you must be sure to follow the manufacturer’s directions). Weed and feed does just that–it feeds the lawn to promote root growth and lawn density, and also kills dandelions and other lawn weeds. Scotts Plus 2 should only be used twice during the growing season, and when dandelions and other lawn weeds are growing. The Super Bonus can be applied anytime weeds are growing. Be sure to read the packaging label as both products can be harmful to certain types of grass and should not be used on them.

Check the weather forecast before applying the Scotts product. Rain should not be forecasted for at least 24 hours after applying the fertilizer. Do not water your lawn for 24 hours after applying the weed and feed. Also, the fertilizer should be applied when there is little or no wind–otherwise there is a possibility that the fertilizer will be blown on plants and shrubs.

  • Scotts has two different weed and feed products: Scotts Lawn Pro Super Turf Builder with Plus 2 Weed Control, and Scotts Super Bonus S Weed and Feed.
  • ( Scotts Plus 2 should only be used twice during the growing season, and when dandelions and other lawn weeds are growing.

Check the grass to make sure that it is slightly wet from the morning dew. If the grass is dry you will need to sprinkle it lightly before applying the fertilizer. The moisture enables the fertilizer to stick to the blades of grass and to the weeds.

Set the gauge on the spreader according to the setting gauge chart on the bag of Scotts Weed and Feed. There are two types of spreaders, rotary or broadcast spreaders and drop spreaders. The spreaders have settings on them to control how much fertilizer is dropped. The correct setting will be listed on the fertilizer bag.

  • Check the grass to make sure that it is slightly wet from the morning dew.
  • The correct setting will be listed on the fertilizer bag.

Fill the hopper with fertilizer. Fill it while on a sidewalk or driveway as you do not want to get a concentrated amount of fertilizer on the lawn should you spill some.

Apply the fertilizer following the directions on your spreader. Do not overlap your application as it will apply too much fertilizer in one area and there is a possibility of burning the grass. Do not stop in one spot with the release lever open, as this will also send a concentrated amount of fertilizer in one spot–burning the grass.

See also  Is Seeded Weed Less Potent

When the lawn is complete, sweep away any fertilizer that has gotten on the sidewalk or driveway. Also, rinse out your spreader and allow it to dry.

  • Fill the hopper with fertilizer.
  • Do not overlap your application as it will apply too much fertilizer in one area and there is a possibility of burning the grass.

Wash your hands thoroughly after working with fertilizer. Grass should not touch the bottom of the spreader when applying the fertilizer. Therefore, be sure to mow any tall grass before putting down the weed and feed. Do not apply to newly seeded lawns.

Keep children and pets off of the grass after applying fertilizer for at least 24 hours (until after you water the lawn).

How Long Does Scotts Weed and Feed Take to Work?

It may take up to 14 days to see full weed-killing results from Scotts Weed and Feed. However, the effects of the fertilizer component in the weed and feed will begin to work in as little as 1–5 days, with additional results for several weeks afterward.

The active ingredients in Scotts Turf Builder Weed and Feed are Dicamba and Mecropop, which are both post-emergent herbicides that attack established weeds in your lawn without harming the grass. These herbicides work by attacking plant systems to kill weeds down to the root. This process takes time but yields great results.

Table of Contents

How to Apply Scotts Weed and Feed for Best Results

To get the most out of your weed and feed, it’s essential to apply the product to your lawn at the right time and under the right conditions. Scotts Turf Builder Weed and Feed performs best when applied according to these guidelines:

  • Temperatures are 60–90℉.
  • The lawn is damp (from dew or light sprinkling) but not wet.
  • A lawn spreader is used to evenly distribute the product.
  • Do not water the lawn for 24 hours after application.
  • Avoid mowing for 48 hours after application.

A damp lawn provides the best surface for the herbicide to stick to weed leaves, which helps the weed control product infiltrate the plants and begin killing them. This provides a huge boost in its effectiveness. Just make sure your lawn isn’t so wet that the product washes away.

Signs Scotts Weed and Feed is Working

How will you know if your lawn care mission was a success? In order to determine if your Scott’s Weed and Feed application is delivering results, look for these signs:

  • 1–5 Days: Greener grass that appears to be growing thicker and faster.
  • 7 Days: Initial yellowing and wilting of weeds in the grass.
  • 14 Days: Most weeds in the lawn are brown, dead, and easily pulled out by hand.
  • 30 Days: Most broadleaf weeds in the lawn are dead. The grass is much more green and lush than before.

By following the application for Scotts Weed and Feed, you will initially see your grass growth surge as broadleaf weeds begin to wilt. Over time, the weeds will die as the grass grows thicker, taking over places where weeds previously grew.

See also  Weed Seed Feed Lawn

How Long Does Scotts Weed and Feed Take to Absorb?

It can take up to 24 hours for Scotts Weed and Feed to be completely absorbed into weed systems. This is the reason it’s important to avoid watering and/or mowing shortly after applying weed and feed.

Although most of the herbicides in Scotts Turf Builder Weed and Feed are absorbed within 24 hours, the chemicals still require time to work their way through the plant and kill it. Just because the herbicide has been absorbed doesn’t mean it’s done working. Remain patient as the product works to wipe out weeds.

Can You Water after Spreading Weed and Feed?

Wait 24-48 hours before watering your lawn after spreading Scotts Weed and Feed. If you water too soon after application, you risk washing the herbicide off plant leaves. Watering too soon after application can seriously diminish the effectiveness of the product.

  • Avoid watering for 24 hours after spreading weed and feed.
  • Do not spread weed and feed if rain is forecasted to fall within 24 hours.
  • Water the day before spreading weed and feed, to ensure the lawn is damp but not wet.

Rain can wash away your weed control product just like a lawn sprinkler. If rain is likely to fall within 24 hours of applying weed and feed to your yard, wait to apply another day. If you’re worried about your lawn drying out, water the day before spreading weed and feed. This will keep the lawn moist, causing the weed and feed to stick to plant leaves and maintain grass health.

How Soon Can You Mow after Spreading Weed and Feed?

Allow 48 hours to pass after weed and feed application before mowing a lawn. Mowing can not only unevenly distribute fertilizer and herbicide, it can even throw weed and feed into garden areas, where the herbicide ingredients can harm vegetables and flowering plants.

  • Wait 48 hours before mowing.
  • Mowing too soon can spread weed and feed onto garden plants, potentially killing them.
  • Fertilizer may be spread unevenly by mowing.

The fertilizer in Scotts Turf Builder Weed and Feed performs best when allowed a full 48 hours to break down and enter the soil. For best results in killing weeds and building a healthier lawn, hold off on mowing after application.

How Soon Will Scotts Weed and Feed Show Results?

Scotts Turf Builder Weed and Feed does two things at once: feeds your yard and kills weeds. You will begin to see a greener, healthier grass in 1–5 days, with full results in 4–6 weeks. On the weed control front, Scotts will begin to kill weeds within 7 days but will show complete results in 14 days.

When applied correctly, weed and feed will deliver a big impact by both killing weeds and boosting your lawn’s performance. All it requires is patience and correct application to get the most out of the product.

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

No votes so far! Be the first to rate this post.