Marijuana Seed Pods

ILGM

Buy Cannabis Seeds Online

Growing weed in an AeroGarden: the complete step by step guide with everything you need to know along with pro-tips by experimented growers. This definition explains the meaning of Seed Pod and why it matters. What are feminised seeds? Dutch Passion created feminized cannabis seeds Feminised cannabis seeds have been one of the most important contributions to the cannabis growing movement in the

How to Grow Weed in your AeroGarden

Miracle-Gro AeroGarden™ is an exciting hydroponic system. You can grow fresh herbs, lettuce, tomatoes, year-round, in the comfort of your home.

You may be wondering: Is it possible to grow weed in an AeroGarden? And is it worth it? The short answer is Yes.

In this guide, I’m going to show you everything you need to know to grow weed your AeroGarden™ successfully including the best practices, the material needed, and exclusive pro-tips by experimented growers.

The best part? It will pay for itself in only 2 or 3 grows in weed value!

Table of contents
1. The Best AeroGarden Models For Weed

At the time I wrote these lines, the available models are; Sprout, Harvest, Classic, Bounty, and Farm family. To grow weed successfully, you will need a garden with 24 inches of growing height capacity and a powerful grow light panel.

So here are the AeroGarden models I recommend:

The AeroGarden™ Classic 9 is one of the most powerful models. It comes with a 45-watt LED full spectrum growth light and a growing height extendable up to 24 inches.

The Classic 9 also includes a touch screen control panel that makes things very easy and fun to control!

Classic 9 Bounty model has been replaced recently by a new design and this one is now obsolete but still one of the best to grow weed.

The most recent AeroGarden Bounty comes with a 40-watt grow light. The Bounty Elite (WiFi and Alexa Compatible) comes with a 50-watt grow light and both have 24 inches of growing height capacity.

Finally, the bigger models available are the AeroGarden™ Farm family with 60W of dual LED power and 24 inches of growing height.

2. Weed strain and seed type for the AeroGarden

Since the maximum grow height is only 24 inches (when the LED panel is fully deployed), it’s crucial to choose a strain that will stay small and compact.

Some strains can grow big plants that are not suited for the AeroGarden small reservoir. The strains also determine the effects and medical attributes.

2.1 Cannabis seed types

Autoflowering seeds are perfect for beginners because they grow very quickly and stay smaller. Also, there’s no need to change the light cycle to induce the flowering stage, and you will get only female plants.

Some strains can take only 10 weeks from seed to harvest.

On the other hand, yields are usually smaller with autoflowering seeds and most have a lower THC percentage.

Feminized seeds are also great, they allow growers to apply training techniques that aren’t recommended for auto and they can be cloned.

You will have to change the light cycle from 18/6 to 12/12 to trigger the flowering phase. Increased darkness hours tell the plant the fall is coming and start creating buds.

Key takeaway: Feminized seeds give more control to the experienced grower while autoflower seeds grow faster and are suitable for beginner grower.

2.2 Recommended marijuana strains for the AeroGarden
    – (Hybrid) – (Hybrid) – (Indica) – (Indica) – (Hybrid) – (Hybrid) – (Hybrid) – (Hybrid) – (Indica) – (Hybrid) – (Hybrid)
3. The shopping list

Now you have your AeroGarden™ and your seeds, you will need the material below, and the optional list will help to have more yield out of your grow.

3.1 Required
3.2 Optional products

Cannabis, like any other plants, needs calcium and magnesium.

Your tap water may have calcium and magnesium in small concentrations, but likely not enough.

If you’re using distilled water, you will need to add a Cal-Mag solution to your water as they are essential secondary nutrients for healthy plant growth.

See also  When To Plant Weed Seeds Outdoors

Botanicare Hydroguard® is well known for their unique beneficial bacteria that help to increase root mass and health.

Pro-tip:

In my installation, I have added an external air pump with an air stone to make more bubbles in the root zone. This helps to prevent roots rot, and bring more oxygen to the roots.

The external pump also helps to reduce the usage of the AeroGarden™ built-in pump. The water temperature will stay low, and you will be able to keep an optimal temperature (between 65 and 80 degrees Fahrenheit).

On the top of the AeroGarden reservoir, you will find two water/air ports with rubber plugs that you can remove.

They are the same size as the standard aquarium airline tubing. Just place the tubing inside one of them and put the air stone in the center of the bowl.

4. Nutrients and the importance of pH

Important: don’t use the provided plant food that comes with the AeroGarden™. This will not work, and you will lose your time and seeds.

I use General Hydroponics Flora Series, and I always have great results with these nutrients. Some other popular alternatives are Advanced Nutrients and Botanicare.

Your AeroGarden™ Bounty holds approximately 4 liters of water. I pour this amount of water into a big stainless steel mixing bowl. Let the tap water sit for 24 hours to become chlorine-free or use distilled water.

Now it’s time to add nutrients to the water. Begin with half of the recommended dosage by the manufacturer.

If you’re using GH Flora Series, take a look at this fully-tested nutrient schedule.

4.1 pH control

The pH scale ranges from 0 to 14. The pH of the AeroGarden™ solution should be between 5.5 and 6.5.

So I target 6, and I check with the pH pen tester every day and make the required adjustments with pH buffers (do not use pH up and pH down in the same solution).

In the vegetative phase, the pH tends to go higher, and in the flowering stage, it tends to go lower. Keeping the pH in the target zone is essential. Out of this zone, the cannabis plant may be unable to absorb some nutrients, and this leads to nutrient deficiencies.

If the pH fluctuates a lot or is out of control for a long time, your plant leaves will become distorted especially in the new growth areas.

This can be reverted, but the affected leaves will not return to normal appearance.

Key takeaway: pH problems can slow the growth of your cannabis plants and lower your yield.

4.2 Total dissolved solids (TDS) & parts per million (PPM)

Before pouring the solution into the AeroGarden’s bowl, you need to verify the concentration of nutrient in the solution with the TDS digital meter.

In the first weeks, the PPM should be around 400, and this amount increase as the marijuana plants grows. In the early flowering stage, the TDS could be around 1000+ PPM.

High nutrient concentration levels will not help the plant to grow faster and can lead to problems like nutrient burn.

5. AeroGarden setup to grow weed

Now the fun part! I assume you have already assembled your hydroponic system and you have transferred the solution to the AeroGarden reservoir.

Now let’s take a closer look at the control panel. First, set the clock, and if you’re in the quick plant menu, select the grow anything option.

5.1 Grow light settings

Select the sun icon, and follow the steps to configure the grow light. If you have autoflowering seeds, I recommend 20/4 light cycle. My settings are as follow; light open at 6:00 am, and close at 2:00 am.

For feminized seeds, I suggest 18/6 for the vegetative stage, then switch to 12/12 to trigger flowering stage.

5.2 AeroGarden™ Pump settings

Select the water icon, and then change settings. Follow the steps until you reach the pump on/off screen.

In the vegetative stage, I recommend setting the pump 30 minutes on, and 60 minutes off.

See also  Fast Growing Weed Seeds

In the flowering stage, it’s better to give an oxygen boost in the water for the increasing root masse of your plants. So, if you don’t have an external pump, set the pump to 60 minutes on, and 30 minutes off.

If you have the external air pump with an air stone, keep in mind this one should run all the time from seed to harvest. You can configure the AeroGarden built-in pump 10 minutes on, and 60 minutes off when you run the external pump.

5.3 Nutrients settings

Finally, select the nutrients icon, and then settings. Set your nutrients cycle to 7 days. This is a simple reminder, and the AeroGarden™ will give you a warning every week to add nutrients and replace the water.

6. Seed germination

I strongly recommend growing only one or two plants at a time. Your marijuana plants will need an increased amount of space while growing and try to put more plants will decrease the yield.

Take two grow sponges and baskets, then place the seeds into the small holes. Be sure seeds are not falling too deep, (1/2” would be awesome). Cover the two pods with the provided transparent domes and put duct tape over the remaining pod holes.

From my experience, it could take anywhere from 2 to 4 days to see the first tiny sprout.

Seed Pod

A seed pod is exactly what it sounds like – a pod produced on a cannabis plant after fertilization that contains seeds. However, unlike with growing vegetables and fruit, seeds are undesirable when growing cannabis for consumption, and the presence of seed pods can mean mutation, or the presence of a male plant, rather than a female plant.

Maximum Yield Explains Seed Pod

In the world of cannabis, female plants produce flowers, which are what humans consume (buds). Under natural conditions, male and female plants would intermix, allowing fertilization to occur, and the pollen of the male to fertilize the flowers of the female, resulting in the development of seeds. Those seeds would then be dispersed to grow new plants elsewhere. In cultivation for consumption, this is not what you want. The presence of a seed pod can indicate that you have a male plant mixed in with your female plants.

When cultivating cannabis for consumption, only female plants are desired, as only female plants produce buds. Male plants do produce trace amounts of THC in their leaves, but this isn’t sufficient for consumption. The best way to tell if male plants are present is to check the shape of the flowers – male flowers look dramatically different to buds grown on a female flower.

All male plants should be removed prior to pollen development to ensure that they do not fertilize female plants. Buying from a reputable grower that creates feminized seeds is a good way to reduce the chance of inadvertently growing male plants.

However, the presence of seed pod does not automatically mean that a male plant is present. Female plants can mutate under growing stress and become hermaphrodites. These can then self-fertilize and create seed pods without the need for a natural male plant in the area.

What are feminised seeds?

Dutch Passion created feminized cannabis seeds

Feminised cannabis seeds have been one of the most important contributions to the cannabis growing movement in the last generation. Dutch Passion were the first ones who, against all odds, created cannabis seeds that gave rise to 95%+ female plants. These seeds are known as feminised seeds, today they are the most popular and convenient choice for those growing their own stash.

The inconvenience of regular seeds

Before feminised seeds, ‘regular’ cannabis seeds were used which produced approximately 50% male and 50% female plants. This meant that growers had to germinate and grow twice the desired number seedlings in order to reach a satisfactory number of mature females. With the arrival of feminised marijuhana seeds a grower simply plants the desired number of seeds and forgets about the inconvenience of male plants. Male plants not only waste space in a garden, they also risk reducing the finest sensimilla into seed pods. For most growers of recreational or medical marijuana the male plant is simply no longer wanted. The recent boom in home-grown cannabis has been made a lot easier with the arrival of feminised marijuana seeds. No more worrying about how to identify male plants.

See also  Oregon Seeds Weed

Feminised marijuana seeds are grown in the same way as regular seeds. They can be grown indoors, in greenhouses or outside. They can be grown in soil or hydroponic systems. Feminised seeds give more stable results than regular seeds, resulting in better potency for 80% of all varieties.

The feminisation process

The exact process of cannabis seed feminisation has been a secret for many years. The principle is straightforward. Female plants can be stimulated to produce pollen in such a way that the pollen is regarded as ‘female pollen’. The female pollen is used to pollinate a female plant which then starts producing seeds. The seeds produced by this method are feminised – they give rise only to female plants.

The benefits of feminised marijuana seeds

As an additional benefit the feminised marijuana seeds tend to give rise to more uniform plants than regular seed. For the experienced growers feminised seeds have simplified life. To the new grower, feminised cannabis seeds are the only way to go. Growing top quality strains of cannabis has never been as easy, just choose the strain, plant the seeds and ensure ample light and sufficient nutrients.

Dutch Passion invented feminised marijuana seeds and have perhaps the worlds best selection of top quality feminised strains. If you are thinking about buying some feminised seeds then first take a look at what Dutch Passion has to offer – you won’t be disappointed!

The feminized seed experiment

In a Dutch Passion experiment done in 1999 Dutch Passion grew 15 varieties of “feminized” seeds. We started with 30 seeds per variety. The goals were: 1) to determine the percentages of female, male, and hermaphroditic plants. 2) to compare the uniformity (homogeneity) among plants from “feminized” seeds with those grown from “regular” seeds.

1. The results were excellent. Nine out of fifteen varieties had 100% female offspring. Percentages of female plants from the other 6 varieties were between 80 and 90%. These plants were all hermaphrodites, producing their male flowers at the end of their lifecycle. Seed-setting hardly took place. No males were found.

2. Approximately 70% of the plants of varieties grown from “feminized” seeds were far more uniform than plants grown from “regular” seeds of the same variety. About 20% of the varieties were a little more uniform, while in 10% of the varieties no difference in uniformity was seen.

From literature and our own findings it appears that the growth of a male or female plant from seed, except for the predisposition in the gender chromosomes, also depends on various environmental factors. The environmental factors that influence gender are:

• a higher nitrogen concentration will give more females.
• a higher potassium concentration will give more males.
• a higher humidity will give more females.
• a lower temperature will give more females.
• more blue light will give more females.
• Fewer hours of light will give more females.

It is important to start these changes at the three-pairs-of-leaves stage and continue for two or three weeks, before reverting to standard conditions.

To produce our feminized cannabis seeds, we start with selected female clones. Under standard conditions these female clones do not produce any male flowers. By the method we found, we are able to have these female clones produce abundant male flowers and pollen (see photos). The pollen thus produced we use for the production of our “feminized” seeds.

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

No votes so far! Be the first to rate this post.